• {{ result.text }}

  • {{ result.text }}

APZ115 Marble Low

Shower drain without edge with grid for embedding tiles



For indoor use
For drainage of floor-level showers
For installation into open spaces or near the wall of the shower area
For wheelchair access
For sites with limited floor height
Product codeEANTechnical
APZ115-3008595580565442Technický list
APZ115-5508595580565459Technický list
APZ115-6508595580565466Technický list
APZ115-7508595580565473Technický list
APZ115-8508595580565480Technický list
APZ115-9508595580565497Technický list
APZ115-10508595580565428Technický list
APZ115-11508595580565435Technický list


EN 1253

Customs code


Technical parameters:

Odour trap
28 mm
Flow rate
35 l/min
Resistance of odour trap against the pressure
575 Pa
Waste pipe diameter
40 mm
Minimum thickness of concrete
70 mm
Total installation height
70 – 97 mm
Load class K3
300 kg


Linear drain from stainless steel (hardened by pickling, passivation and electrochemical polishing)
Installation height from 70 mm
Adjustable height
Trap firmly connected to the drain – 100% waterproofing
Self-adhesive tape for quality waterproofing
Mechanically cleanable trap up to the waste pipe
The collar and trap are protected by foil, and the channel itself by a polystyrene insert
The high flow rate is achieved due to the double compartment trap system
Possibility to buy a combined odour trap
25 years guarantee
Shower drain material: stainless steel 2 mm, AISI 304, DIN 1.4301
Trap material: polypropylene

Logistic information

Quantity – packing
9 pcs
Quantity – Palett
144 pcs
Dimensions – piece
385×185×160 mm
Dimensions – packing
590×430×390 mm
2,4806 kg
Weight – packing
22,3254 kg
Weight– Palett
357,2064 kg

Scope of supply:

The shower drain is assembled with the odour trap
Fixation set: screws Ø6×50 – 2 pcs, dowels Ø10 – 2 pcs
Self-adhesive waterproofing tape
Protective foil covering for the drain edges and odour trap
Dismantling hook