APZ1106 Professional Low

Shower drain with an edge for full grids, straight outlet

Application:

For indoor use
For wooden and prefabricated buildings
For drainage of floor-level showers
For installation into open spaces or near the wall of the shower area
For full grids, grid FLOOR for embedding tiles and prismatic grid GAP
For wheelchair access
For sites with limited floor height
Product codeEANTechnical
sheet
APZ1106-3008595580527617Technický list
APZ1106-5508595580527648Technický list
APZ1106-6508595580527655Technický list
APZ1106-7508595580527662Technický list
APZ1106-8508595580527679Technický list
APZ1106-9508595580527686Technický list
APZ1106-10508595580527631Technický list
APZ1106-11508595580527624Technický list

Norms:

EN 1253

Technical parameters:

Odour trap
28 mm
Flow rate
44 l/min
Resistance of odour trap against the pressure
575 Pa
Waste pipe diameter
40 mm
Minimum thickness of concrete
65 mm
Total installation height
80 – 106 mm
Load class K3
300 kg

Specifications:

Linear drain from stainless steel (hardened by pickling, passivation and electrochemical polishing)
For inserting full grids – stainless steel, tempered glass, synthetic stone, grid for embedding tiles and prismatic grid
Installation height from 65 mm
Adjustable height
Trap firmly connected to the drain – 100% waterproofing
Self-adhesive tape for quality waterproofing
Mechanically cleanable trap up to the waste pipe
The collar and trap are protected by foil, and the channel itself by a polystyrene insert
The high flow rate is achieved due to the double compartment trap system
25 years guarantee
Shower drain material: stainless steel 2 mm, AISI 304, DIN 1.4301
Trap material: polypropylene

Logistic information

Quantity – packing
9 pcs
Quantity – Palett
144 pcs
Dimensions – piece
385×130×175 mm
Dimensions – packing
mm
Weight
1,9704 kg
Weight – packing
kg
Weight– Palett
kg

Scope of supply:

The shower drain is assembled with the odour trap
Fixation set: screws Ø6×50 – 2 pcs, dowels Ø10 – 2 pcs
Self-adhesive waterproofing tape
The collar and the odour trap inlet are covered by the protective foil
Installation channel cover
Fixing hardware for anchoring the adjustable legs: screw M6×12 – 2 pcs

منتجات ذات صلة