APZ1BLACK

Shower drain with an edge for perforated grids, black-matt

Application:

For indoor use
For drainage of floor-level showers
For installation into open spaces or near the wall of the shower area
For perforated stainless steel grids
For wheelchair access
Product codeEANTechnical
sheet
APZ1BLACK-3008595580511869Technický list
APZ1BLACK-5508595580511883Technický list
APZ1BLACK-6508595580512002Technický list
APZ1BLACK-7508595580512293Technický list
APZ1BLACK-8508595580512507Technický list
APZ1BLACK-9508595580512798Technický list
APZ1BLACK-10508595580511807Technický list
APZ1BLACK-11508595580511814Technický list
APZ1BLACK-14508595580511821Technický list

Norms:

EN 1253

Technical parameters:

Odour trap
50 mm
Flow rate
60 – 68,8 l/min
Resistance of odour trap against the pressure
982 Pa
Waste pipe diameter
50 mm
Minimum thickness of concrete
85 mm
Total installation height
100 – 158 mm
Load class K3
300 kg

Specifications:

Linear drain from stainless steel (hardened by pickling, passivation and electrochemical polishing)
Installation height from 85 mm
Adjustable height
Trap firmly connected to the drain – 100% waterproofing
Self-adhesive tape for quality waterproofing
Mechanically cleanable trap up to the waste pipe
The collar and trap are protected by foil, and the channel itself by a polystyrene insert
The high flow rate is achieved due to the double compartment trap system
Possibility to buy a combined odour trap
25 years guarantee
Shower drain material: stainless steel 2 mm, AISI 304, DIN 1.4301, with black-matt finish
Trap material: polypropylene

Logistic information

Quantity – packing
9 pcs
Quantity – Palett
144 pcs
Dimensions – piece
385×130×175 mm
Dimensions – packing
mm
Weight
1,856 kg
Weight – packing
17,5932 kg
Weight– Palett
301,4912 kg

Scope of supply:

The shower drain is assembled with the odour trap
Fixation set: screws Ø6×50 – 2 pcs, dowels Ø10 – 2 pcs
Self-adhesive waterproofing tape
The collar and the odour trap inlet are covered by the protective foil
Installation channel cover
Fixing hardware for anchoring the adjustable legs: screw M6×12 – 2 pcs

منتجات ذات صلة