APZ101S

Shower drain with an edge for perforated grids

news

Application:

For indoor use
For drainage of floor-level showers
For installation into open spaces or near the wall of the shower area
For perforated stainless steel grids
For wheelchair access
For sites with limited floor height
Product codeEANTechnical
sheet
APZ101S-7508595580562281Technický list
APZ101S-8508595580562267Technický list
APZ101S-9508595580562274Technický list

Norms:

EN 1253

Technical parameters:

Odour trap
28 mm
Flow rate
35 l/min
Resistance of odour trap against the pressure
575 Pa
Waste pipe diameter
40 mm
Minimum thickness of concrete
55 mm
Total installation height
70 – 96 mm
Load class K3
300 kg

Specifications:

Linear drain from stainless steel (hardened by pickling, passivation and electrochemical polishing)
Waterproofing drainage through the drainage holes in the drain body
Installation height from 55 mm
Adjustable height
Trap firmly connected to the drain – 100% waterproofing
Self-adhesive tape for quality waterproofing
Mechanically cleanable trap up to the waste pipe
The collar and trap are protected by foil, and the channel itself by a polystyrene insert
The high flow rate is achieved due to the double compartment trap system
25 years guarantee
Material of shower drain: stainless steel 2 mm, AISI 304, DIN 1.4301, EN1253-1
Trap material: polypropylene

Logistic information

Quantity – packing
12 pcs
Quantity – Palett
36 pcs
Dimensions – piece
820×135×170 mm
Dimensions – packing
825×375×830 mm
Weight
3,3011 kg
Weight – packing
39,6132 kg
Weight– Palett
138,8396 kg

Scope of supply:

The shower drain is assembled with the odour trap
Fixation set: screws Ø6×50 – 2 pcs, dowels Ø10 – 2 pcs
Self-adhesive waterproofing tape
The collar and the odour trap inlet are covered by the protective foil
Installation channel cover
Fixing hardware for anchoring the adjustable legs: screw M6×12 – 2 pcs

منتجات ذات صلة